翻訳と辞書
Words near each other
・ Ceramic colorants
・ Ceramic decal
・ Ceramic discharge metal-halide lamp
・ Ceramic engineering
・ Ceramic flux
・ Ceramic foam
・ Ceramic forming techniques
・ Ceramic Fuel Cells
・ Ceramic glaze
・ Ceramic heat cell
・ Ceramic heater
・ Ceramic Hello
・ Ceramic houses
・ Ceramic knife
・ Ceramic materials
Ceramic matrix composite
・ Ceramic membrane
・ Ceramic mixing technology
・ Ceramic mold casting
・ Ceramic molding
・ Ceramic petrography
・ Ceramic products cluster
・ Ceramic resonator
・ Ceramic tile cutter
・ Ceramic valve
・ Ceramic water filter
・ Ceramic, North Carolina
・ Ceramic-impregnated fabrics
・ Ceramica
・ Ceramica (moth)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Ceramic matrix composite : ウィキペディア英語版
Ceramic matrix composite

Ceramic matrix composites (CMCs) are a subgroup of composite materials as well as a subgroup of technical ceramics. They consist of ceramic fibres embedded in a ceramic matrix, thus forming a ceramic fibre reinforced ceramic () material. The matrix and fibres can consist of any ceramic material, whereby carbon and carbon fibres can also be considered a ceramic material.
==Introduction==
The motivation to develop CMCs was to overcome the problems associated with the conventional technical ceramics like alumina, silicon carbide, aluminium nitride, silicon nitride or zirconia – they fracture easily under mechanical or thermo-mechanical loads because of cracks initiated by small defects or scratches. The crack resistance is – like in glass – very low. To increase the crack resistance or fracture toughness, particles (so-called monocrystalline ''whiskers'' or ''platelets'') were embedded into the matrix. However, the improvement was limited, and the products have found application only in some ceramic cutting tools. So far only the integration of long multi-strand fibres has drastically increased the crack resistance, elongation and thermal shock resistance, and resulted in several new applications.
Carbon (C), special silicon carbide (SiC), alumina (Al2O3) and mullite (Al2O3–SiO2) fibres are most commonly used for CMCs. The matrix materials are usually the same, that is C, SiC, alumina and mullite.
Generally, CMC names include a combination of ''type of fibre/type of matrix''. For example, ''C/C'' stands for carbon-fibre-reinforced carbon (carbon/carbon), or ''C/SiC'' for carbon-fibre-reinforced silicon carbide. Sometimes the manufacturing process is included, and a C/SiC composite manufactured with the liquid polymer infiltration (LPI) process (see below) is abbreviated as ''LPI-C/SiC''.
The important commercially available CMCs are C/C, C/SiC, SiC/SiC and Al2O3/Al2O3. They differ from conventional ceramics in the following properties, presented in more detail below:
*Elongation to rupture up to 1%
*Strongly increased fracture toughness
*Extreme thermal shock resistance
*Improved dynamical load capability
*Anisotropic properties following the orientation of fibers

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Ceramic matrix composite」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.